Alat Laboratorium Aspal

Alat Laboratorium Aspal

Menampilkan 1–9 dari 18 hasil

Centrifuge Extractor Test Set
Standard Testing : ASTM D-2172 / AASHTO T-164; According SNI 03-6894-2002

For determining bitument content in hot mixed paving and pavement samples.

Consist of :

Centrifuge Extractor : Electric, 220 V-AC, variable speed DC motor up to 3600 rpm, alumunium housing, removeable cover and bowl,1500 gram capacity.

Filter Paper : Low ash filter paper, box of 50 sheet.

Solvent : Perchloraethylen (PCE), bottled.

Dimension (l x w x h): 60 x 40 x 60 cm / Gross weight: 50 Kg
Distilation of Cutback Asphalt
ASTM D-402 / AASHTO T-78

Consist of :

Flask : Heat resistance glass 500 ml capacity, with side arm.

Condenser : Glass, jacketed.

Adapter :Heat resistance glass.

Shield : Metal, absestos lined, glass window.

Shield and Flask Support : Variable height adjustment.

Support and Clamp : Metal, provided with clamps.

Bunsen Burner : Heat resource.

Asbestos Wire Gauze : Asbestos centre, 15 cm x 15 cm.

Graduated Cylinder : 100 ml capacity.

Thermometer : ASTM 7 C, 2 to 300 deg.C.

Dimension (l x w x h) : 100 x 80 x 80 cm / Gross weight : 10 Kg
Ductility of Bituminous Material
Standard Testing : ASTM D-113 / AASHTO T-51; According SNI 06 -2432-1991

For determining ductility of formed asphalt/ cement or semi solid bitument by measuring distance of elangation before breaking point when two end of briquet are pulled a part at a specific speed and temperature.

Consist of :

Ductility Mold : Form sample shape and hold end during test, made of brass, provided with base.

Ductility Machine : Electric 220 V-AC, stainless steel bath, provided with temperature control.

Pulling speed : 5 cm/min, / Travel range : 150 cm.

Dimension (l x w x h) : 244 x 80 x 80 cm / Gross weight : 150 Kg
Flash and Fire Point
by Cleveland Open Cup Electric heating

ASTM D-92 / AASHTO T-48

For determining flash and fire point by cleveland open cup for petroleum product and other liquidexcept fuel oils and materials having an open flash point below 79°C (173°F) as determined by the cleveland open cup tester.

Consist of :

Flash Cup : Brass, insulation handle.

Cleveland Electric : Electric, 220 V-AC, heating speed control.

Thermometer : Astm 11 C, 6 to 400°C.

Dimension (l x w x h) : 150 x 30 x 50 Cm / Weight (approx) : 20 Kg
Jual Automatic Asphalt Compactor
Spesifikasi :

Power : Electro motor 1/3 Hp, 1 Phase, 220 V, 50 Hz.

Control : digital / push botton.

Counter : Digital Led display.

Push Button ; Count setting, Reset, Start, Stop.

Hammer : Circular foot type 10 lb weight, 18” drop height.

Mould : 4” 6 inch diam, sample mould.

Frame : Totally enclosed, rigidly mounted.

Pedestal : Hard Wood, Steel Base Plate, Quick release clamps, Mold holder in place.

Supplied complete with Compaction hammer and Compaction mold. Accessories.
Jual Benklemen Beam
For measuring the deflection of flexible pavement under the action of moving wheel loads.

Fixed Beam : Alumunium profile frame, 3 points adjuster, with vibrator and dial holder. Alumunium strip arm, 1 : 2 level ratio.

Tire Gauge : 120 psi capacity.

Surface Thermometer : Range 0 – 100 deg.C.

Dial Indicator : Range 30 x 0.01 mm.
Jual Core Drilling Test
Deskripsi Produk

CORE DRILLING TEST SET
Consist of :

Core Drilling Machine
Cast alumunium frame, gasoline engine 7 HP, 4 cyle vertical drilling
position : rubber caster, up to 4″ dia. bit.

Diamond Bit 4”inner dia

Sample Tong 4″ dia.

Breaking Strip, Galvanized steel.

Spanner Steel, 42 mm and 32 mm.
Jual Flash and Fire Point
ASTM D-92 / AASHTO T-48

For determining flash and fire point by cleveland open cup for petroleum product and other liquids, except fuel oils and materials having an open flash point below 79°C (173°F) as determined by the cleveland open cup tester.

Consist of :

Flash Cup: Brass, insulation handle.

Burning Pipe : Brass pipe, insulation handle.

Flash Cup Plate : Steel Plate.

Support : Adjustable height metal, thermometer holder.

Y-Connector : Brass, provided with gas hose.

Bunsen Burner : Heat resources.

Thermometer : Astm 11 C, 6 to 400°C.

Dimension (l x w x h) : 150 x 30 x 30 Cm / Weight (approx) : 8 Kg
Jual Marshall Test
MARSHALL TEST SET; ASTM D-1559 AASHTO T-245
For determining the resistance to plastic flow of cylinder specimen of bituminous paving mixture loaded on the lateral surface by means of the marshall apparatus.
Specification :
Compression Machine; steel frame, electric, 220 V-AC, 1/ 2 HP, 1 Phase, speed : 2 ” per minute, 1 Set

Compaction Mold; machined steel, galvanized, 4 ” dia., 3 ” height, with collar and base plate, 1 Set

Stability Mold; cast alumunium, split type 4 ” i.d., 4 ” wide, 1 Set

Compaction Hammer; machined steel, galvanized, 10 lbs hammer weight, 18 ” drop height, 1 Set

Compaction Pedestal; wooden base with steel platen, 1 Pc

Compaction Mold Holder; machined steel, quick clamping system, 1 Set

Extruder; steel frame, hydraulic system, 1 Set

Flow Meter; cast alumunium, clamping bolt, with dial indicator 30 x 0.01 mm, 1 Set

Water Bath; stainless steel, water heater 220 V-AC, thermostat 30-85oC, 1 Set.6 Proving Ring; 6000 lbs capacity, 1 SetDimension ( l x w x h) : : 67 x 50 x 100 cm
Gross Weight: : 200 kg.

1
2

TOP