Galeri Produk – Laman 2 – Karisma Ligar Karya

Home
Galeri Produk
Page 2

Mei 1, 2026

Galeri Produk

Galeri Produk

Compaction Test Set
COMPACTION TEST SET
ASTM D-698/D-1557 & AASHTO T-99/T-280

Consist of :

Standard Proctor Mold
Machine steel, plated, 4″ i.d., 4.584″ height, 2″ height of collar.

Modified Proctor Mold
Machine steel, plated, 6″ i.d., 4.584″ height, 2″ height of collar.

Standard Proctor Hammer
Machine steel, plated, 12″ drop height, 5,5 lbs weight.

Modified Proctor Hammer
Machine steel, plated, 18″ drop height, 10 lbs weight.

Extruder
Steel frame, hydraulic jack.

Square Pan
Galvanised steel 65 x 65 x 7.5 cm.

Thin Box
Alumunium, 60 gr capacity.

Graduated Cylinder
Plastic, 1.000 ml capacity

Scoop
Cast Alumunium.

Trowel
Pointed type.

Straight Edge
30 cm length.

Rubber Mallet
Wooden handle.
Steel Wire Brush.
Wooden handle.
Compression Machine 250kN
Standard Testing : Astm C-109
For determining compressive strength of cement mortar.

For sample size 2″ x 2″ x 2″ cube or 2″ dia x 4″ height cylinder.

Steel frame, 12″ diameter force gauge

Calibration and certified KAN LK-011-IDN

Hand operated, hydraulic hand pump 10.000 psi capacity.

Standard supply with instruction manual books

Dimension (l x w x h) : 50 x 50 x 80 Cm

Gross weight : 145 Kg.
Compression Machine Digital Print
Specifications :

Digital Concrete Compression Machine 2000 kN cap, 10 kN readability

Diameter Copel Atas 30 cm

Diameter Meja Piston 29 cm

Tinggi Piston 20 cm

Dimensi Bantalan Kubus 20 x 20 x15 cm

Pompa Hydraulic: kapasitas 800 Bar

Power 220 volt Ac – 50 Hz – 1000 Watt

Print Out:

AC DC 5V 3A

15 Watt

Satuan kN

Manual Print

Manual Cutter Paper

Ukuran Kertas 37 x 58 mm

Kode print out: MBTES kN 2020321501

Display Manometer Digital 2000 kN:

Display indicator 6 digit

Power Supply 6 Volt DC. Pressure

Tranducer 700 Bar

Battery Output 6 Volt DC

Speed control
Compressive Strength of Cement(Flow Table)
ASTM C-109 / AASHTO T-106

For determining compressive strenght of hydraulic cement mortar by using 50 x 50 x 50 mm cube speciment.

Consist of :

Cement Cube Mold : 50 x 50 x 50 mm, three gang parallel arrangement, cast iron. For Compression strength tests of portland cement,mortars lime and gypsum.

Flow Table : Hand Operated/Electric

Frame : Welded steel, brass table, 10″ diameter, 0.3 mm thick, 1/2″ drop.

Flow Mold : Brass, base 101.6 mm diameter, 69.85 mm top diameter, height 50.8 mm.

Vernier Caliper : 300 mm measuring capacity, double scale, stainless steel.

Tamper : Plastic, 1/2″ x 1″ face, 6″ length.

Glass Plate : Glass 10 mm thick, 30 x 30 cm.

Graduated Cylinder : Glass made, 250 ml single numbering.

Scraper : Plastic handle, stainless blade, 100 mm length.

Standard supply with instruction manual book

Dimension (l x w x h): 60 x 60 x 60 cm / Gross weight: 50 Kg
Consolidation Test
ASTM D-2435 / AASHTO T-216

For determining the rate and magnitude of consolidation of soil when it is restrained laterally,loaded and drained axially.

Consist of :

Frame : Cast alumunium, two test unit.

Loading set : Three alternative lever arm 1:9, 1:10, 1:11.

Consolidometer : Brass, 50.5 mm sample dia.,porous stone,loading capacity.

Loads : 500 gr weight.

Loads : 1000 gr weight.

Loads : 2000 gr weight.

Loads : 4000 gr weight.

Loads :8000 gr weight.

Sample Tube : Machine steel, 50.5 mm dia.galvanized, with extruder.

Dial Indicator : Range 10 mm x 0.01 mm.

Wire Saw : 10 cm length approx.

Dimension (l x w x h) : 80 x 80 x 150 cm / Gross weight : 130 Kg.
Core Drill Listrik Portable
For cutting core samples from concrete bulding and other material on the road, run ways and structures.

Maximum drilling : 4 inch (101.6 mm)

Rated input power: 1400W

No-Load speed : 0-2200 rpm/min

Dimension Machine (lxwxh) : 440 x 440 x 460 mm approx

Dimension Stand (lxwxh) : 870 x 480 x 470 mm approx. / Nett weight : 34 kg
DIGITAL COMPRESSION MACHINE 3000 kN (Computerized)
Specifications :

Type : compression testing machine computerized

Display : digital

Control : computer control

Power sourch : AC220V

Max. Capacity : 3000 kN

Accuracy grade : 1

Max.capacity : 10<1000kN

Load way electronic load

Loading method : dynamic load

Distance between platens : 100 mm

Piston stroke : 250 mm

Cylinder piston : 310 mm

Side frame : 9.5 cm

Upper and lower frame : 9 cm

Rated preassure : 40 MPa

Spesifikasi Software Comresiion Machine MBTES

Antar muka pengguna berbasis Windows

Menyediakan platform untuk pengukuran material kubus dan silinder, pengaturan uji coba, dan pembuatan laporan

Software melekat pada PC/Laptop, tidak bisa dijalankan dengan PC/Laptop yang berbeda, sebagai proteksi pemindahan software

Penyimpanan dan pengambilan data dari metode dan hasil uji coba. Pengambilan data secara cepat untuk mengubah data sebelumnya

Data berupa laporan dalam bentuk file excel yang dapat ditampilkan dan diubah melalui software sendiri tanpa adanya software Microsoft Office pada PC/Laptop

Metode kalkulasi pengujian menggunakan standard ASTM C.39
Direct Shear Test
DIRECT SHEAR TEST SET
ASTM D-3080 / AASHTO T-236
Consist of :

Loading Machine

Consist of :

Frame
Welded steel frame hand operated.

Loading Hanger.
Machine steel, galvanized, suplied without load

Shear Box
Cast alumunium box, 63.5 mm sample dia., porous stone, loading

Loads
Slotted machine steel, galvanized.

Consist of :

Load, 3167 gr weight

Load, 6334 gr weight

Sample Tube
Machine steel, 63.5 mm dia., with extruder.

Proving Ring, 100 kg capacity.

Dial Indicator, Range 10mm x 0.01mm.

Dial Indicator, Range 20mm x 0.01mm.

Wire Saw, 10 cm length approx.

For More Info Contact Us :
CV. KARISMA LIGAR KARYA
Mobile : 0822 1111 9959
Email : karismaligarkarya@yahoo.com.
Distilation of Cutback Asphalt
ASTM D-402 / AASHTO T-78

Consist of :

Flask : Heat resistance glass 500 ml capacity, with side arm.

Condenser : Glass, jacketed.

Adapter :Heat resistance glass.

Shield : Metal, absestos lined, glass window.

Shield and Flask Support : Variable height adjustment.

Support and Clamp : Metal, provided with clamps.

Bunsen Burner : Heat resource.

Asbestos Wire Gauze : Asbestos centre, 15 cm x 15 cm.

Graduated Cylinder : 100 ml capacity.

Thermometer : ASTM 7 C, 2 to 300 deg.C.

Dimension (l x w x h) : 100 x 80 x 80 cm / Gross weight : 10 Kg
Drying Shrinkage And Mouisture Apparatus

DRYING SHRINKAGE AND MOISTURE APPARATUS ASTM C-490
The apparatus has been designed and manufactured to the recommendation ASTM-C490, Where test are required on laboratory specimens taken from exiting structure.

1
2
3
4
5

TOP